WallSwitch

Power relay to control 110/230 V~ power supply remotely

Protects devices against overcurrent and voltage surges

Operates in bistable or pulse modes

Allows controlling electricity consumption

Power grid security

The device is directly connected to a source of 110 V or 230 V, and it can close or open a circuit at will. The relay has a 3 kW load capacity, which is sufficient to connect a device with a high power requirement. The device's ability to display power consumption in the Ajax app may now be seen thanks to WallSwitch.

Never miss a beat

The Jeweller radio protocol was created by Ajax to guarantee the continuous operation of all security system components. The radio protocol uses frames to synchronise device communication, authentication to prevent spoofing and encryption to prevent hacking.

Intelligent home and business security

Utilize automation scenes to enable your security system to actively defend against threats in addition to reporting them.

Installation with no added effort

Scanning a QR code with the Ajax app is all it takes to connect WallSwitch to the hub in under a minute. This tiny device (39x33x18 mm) makes it simple to insert into a junction box, electrical panel, or switching unit body. Additionally, the adaptable external antenna offers dependable connectivity.

Download Manual

Tech Specs

Download Tech Specs

Classification

Radio channel relay unit

Device type

Remote-controlled

Installation method

Into wall plate

Compatibility

Operates with all Ajax hubs and range extenders

Actuating element

Relay

Voltage protection

For 230 V~ mains: maximum — 264 V, minimum — 161 V
For 110 V~ mains: maximum — 126 V, minimum — 77 V

Relay service life

200,000 switch-ons

Maximum load current

13 A

Maximum current protection

Yes (13 A)

Maximum temperature protection

>65°C

Permissible power

Resistive load at 230 V — up to 3 kW
Resistive load at 110 V — up to 1.5 kW

Electric power meter function

Available

Energy consumption parameter check

Current, voltage, power consumption

Alarm signal delivery time

0.15 s

Power supply

110−230 V±10% 50/60 Hz

Operation modes

Impulse (firmware version 5.54.1.0 or higher. Manufacture date from March 5, 2020)
Bistable

Contact state

Normally open
Normally closed

Adjustable pulse duration (firmware version 5.54.1.0 or higher)

1–255 sec

Jeweller radio technology

Communication range with central unit — up to 1,000 m in an open space
Two-way communication between devices

Radio frequency bands:
866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
(depends on the region of sale)

Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector scanning period — 12–300 s

Learn more about Jeweller

Operating temperature range

From 0°С to +64°С

Permissible humidity

Up to 75%

Anti-sabotage

Protection against fraud
Jamming detection

Protection class of body

IP20

Remote setting and testing

Dimensions

39 × 33 × 18 mm

Weight

30 g

Warranty

24 months

Complete set

WallSwitch
Installation set
User's guide

Compliance with standards

WallSwitch

Power grid security

Never miss a beat

Intelligent home and business security

Installation with no added effort

Tech Specs

Contact our customer care

Contact a sales representative

Contact our technical support